Services
Products
Videos



Energy saving lighting

  03/10/2015

Energy saving lighting
Lights are light and are the most important parts of the illumination device. There are many types of lit based on different physical laws. Lighting sets include light bulbs and additional components such as lampshades, sockets, ballasts, ... ensure the functionality of the electrical, optical and mechanical about.

1. The general characteristics of lights

Sort lights on the market

According to the operating principle can be divided into two large groups of lights are:

- Incandescent lamps are lamps are illuminated when heated. In incandescent light has two types of regular incandescent bulbs and incandescent bulbs with halogen gas added.

- Discharge lamps are lamps used arcing method for illumination. In this type of gas discharge lamps including 4 groups: fluorescent lamps, mercury lamps, sodium lamps (sodium) and halogen lamps Metal (Metal Halide).

 

In appearance, can classify as round and tubular lamps incandescent lamp mushroom, bending light, light tears ...

Our lamps are often used as ordinary incandescent lamps, incandescent halogen gas supplement, fluorescent tubes and compact fluorescent lamps.

1.1. Incandescent

Incandescent Bulbs capacity from 25-40-60 until 200-300W, the average life expectancy of 1,000 hours, the yellow light source.

Efficient light from 10-20lm / W.

Basic Advantages of incandescent color is currently very high index near 100 allows the use of high-quality lighting.

Disadvantages of incandescent bulbs is efficiency of light bulbs only 6-7% calcined than the electricity consumption, 94% of electricity consumed for heat generation.

twelfth. Halogen Incandescent Bulbs

Additional incandescent halogen gas increased luminous efficiency from 20-27lm / W, average life 2.000gio.

The halogen incandescent lamp power from 40-300W for high quality lighting color, however low energy efficiency.

Halogene incandescent light often used as decoration with countless density of bulbs, use a type of switch function adjusts the amount of light (the potentiometer) to coordinate with halogene lights in the room layout bedrooms, living room.

1.3. Fluorescent

 

- Fluorescent lamps normal (denoted T10) with a diameter of 32mm with 40W (1.2m length ball) and a capacity of 20W (0.6m), the average life expectancy 6.000-8.000gio.

- Fluorescent lamps save energy (denoted T8) has a diameter of 26mm with 36W (1.2m length ball) and a capacity of 18W (0.6m), the average life expectancy 6.000-8.000gio.

- Efficient light from 40-90lm / W.

- Fluorescent lamp for white light sources, power savings than incandescent bulbs to light yellow.

- When replacing T8 fluorescent lamps, consumers will not have to change the type of luminaries, light troughs, .... Both fluorescent lamp T8 and T10 are commonly used auxiliary devices listed above.

- To use power-saving recommended full set of T8 and electronic ballasts or low iron loss.

1.4. Ballasts

Ferromagnetic ballasts capacity also consumes about 5-10W for

40W fluorescent lamp. To reduce power dissipation can perform the following two solutions:

- Use ferromagnetic ballasts with low loss. That ballast is made from high quality silicon iron sheets. With the use of T8 fluorescent lamps and electromagnetic ballasts with low loss power savings of 10-20%.

- Use electronic fluid: Electronic ballasts substantially change the frequency inverter from 50Hz up nets high frequency 20-40kHz. Compared with ferromagnetic ballasts, the electronic ballast lights spoil the advantage immediately, with high frequency of power loss reduction lamp, the lamp luminous flux increased by 10% due to the efficiency of the lamp when working with electronic ballasts increased by 15-20% compared with ferromagnetic ballasts. Lights flicker phenomenon excluded. Electronic ballasts with compact size, without causing buzzing. High power factor above 0.9.

1.5. Compact fluorescent lamps

Improving quality fluorescent powder to make up the new generation tubes have color quality and high efficiency illumination enables lean manufacturing tubes and have the ability to integrate lamps, ballasts, switches into a block te called compact lamps. Compact fluorescent lamp is particularly common in sockets (sockets vortex and blind tuck) with integrated electronic ballast. So replacing incandescent bulbs with compact fluorescent light simple.

- Compared with the same luminous flux incandescent lamp power of just one-year compact. Power range from 5-55W of compact lamps, the average life expectancy of 10,000 hours 6,000. Efficient light on 50lm / W, with white light as fluorescent tubes and light as incandescent yellow.

- Compact lamps have extremely small diameter tubes are bent or merge multiple tube into a lamp. There are bulbs with common designs such as 1U, 2U, 3U and spiral; This is mainly a change in form, not affecting the technical elements. 3U bulbs will be manufactured with complex processes than 2U shadow due to light connecting tributaries. Also, on the market, the bulbs 3U high capacity retains the compact size as the ball 2U. Normally, shadow compact 2U type with a capacity less than 20W, if bulbs have greater capacity will have greater length than the smaller capacity.

- Advantages of compact fluorescent light than incandescent bulbs that save power, lighter, higher efficiency. Compared with straight tube fluorescent lamps, compact fluorescent light more compact, the installation is simpler.

- Besides the energy saving, compact fluorescent light bulbs also reduce the flashing light (flicker) due to be equipped with electronic ballasts versus straight fluorescent tubes (usually electronic ballasts).

- Lamp compact when replacing incandescent bulbs for the tail lights use old. Therefore, consumers only buy new light bulbs to the installation of a simple way, without requiring significant changes in technology.

- While the initial investment of compact fluorescent light bulb is higher than incandescent bulbs, but consumers will benefit in the level of electricity consumption. The price of a compact fluorescent light bulb from VND20,000 - VND60,000 while incandescent bulbs are 2.500d. But efficient power saving compact fluorescent light brought great by reducing power consumption and lifespan 5 times 5 times compared with incandescent bulbs.

- The bulb manufacturers have calculated that, when using compact fluorescent light will save 30 - 50 times higher than when using incandescent lamps. Compact lamp life (depending on type) ranges between 6000-10000 hours, while incandescent bulbs usually only reaches about 1,000 hours.

- Compact lamps are mainly used to replace incandescent lamp, not suitable for general lighting (large area), suitable for local lighting in the rooms are small (bathrooms , sheds, stairs ...).

- Although in principle can still use compact lamps to replace straight tube fluorescent lamps but power-saving efficiency by bringing large not so people rarely apply. Also, if replaced with compact fluorescent light will be attached much more light (due to low power) on the same area, the design of more complex line. For example, to replace four straight tube fluorescent lamps with a total capacity of 80W, one must use the bulb to 8 compact (less than 20W / shadow).

2. Summary of measures to save energy in lighting

Electricity for lighting accounts for over 20% of total power consumption, more lights are used during peak hours when the huge peak load power system required to mobilize the entire capacity, so the projector problems light and energy efficiency should be concerned. Here are the main measures:

- Use effective lamp light (lumen / W) biggest. In indoor lighting for compact fluorescent lamp power consumption is only the power of incandescent lamps of the same luminous flux when so should replace the use of incandescent bulbs with compact fluorescent light.

- Need to replace fluorescent lamps with lamp T10-40W T8-36W and 32W.

- Use a trough reflector lamp with good fit for the purpose and place of use increases the utilization factor of lamp luminous flux.

- Use electronic ballasts consume little power and with high power factor ballasts and low iron loss.

- Use thoroughly natural light available.

- You should be whitewashed or painted walls with light-colored roll because just turn at the lights that stay lit by the contrasting color of the walls or objects in the house. Thus you will reduce the amount of light bulbs in the home.

- But do not forget to turn off lights when leaving a room, there is electricity-saving measures without cost.