Services
Products
Videos



Energy saving, environmental protection materials

  03/10/2015

Energy saving, environmental protection materials:

In our country, the problem against heat in summer and retain heat in the winter is especially important. Foreign experience shows that energy consumption in the higher categories of tall buildings from 30 to 35%, while the energy loss can be up to 30-45% compared with the low-rise residential buildings.

Building materials for the hot and humid tropical climate Vietnam should have good thermal properties, ensure waterproofing leaky, moldy, sustainable, long degraded the effects of harsh environment of the humid tropics .

A trend solve heat-resistant, anti-cold, anti-moist monsoon .... the increased use of machinery such as air conditioning, ventilation, dehumidifiers, high-power electric lights .... This trend reached remarkably effective but also involves environmental disasters and costly as most energy consumption is electricity.

There is another solution focused on machines not using electricity that is mainly aimed at the application of scientific basis to create appropriate materials. From this principle, the Company Fortune e • manufacture and market racing type insulating materials to reach all requirements for economic benefits as well as environmental.

Thermal radiation

As the transfer of heat (thermal energy) in the form of electromagnetic waves (infrared) through space. Each material has a positive temperature above zero emit radiation at different levels such as: sun, warm water, humans, animals, furniture, ceilings, walls, floors .... Tia Radiation is not visible and no heat, when it interacts with the surface material, the new energy produced heat radiation makes materials warming.

We can better visualize through the following specific examples: solar thermal radiation makes ceilings and walls of buildings to heat up. This heat transfer to the inside of the ceiling and walls through heat conduction, followed by the thermal radiation of the material made in the ceiling and walls inside the building space. The surface continued emission makes human skin exposed to radiation. Main secondary radiation caused this "sweltering heat" in the house, feeling hot, uncomfortable for humans.

Direction of heat transfer

The direction of heat transfer is an important factor to be considered. Temperature and radiation travels in all directions but basically are vertical. Shown below is the results of research on heat flow in a house.

 

Heat flow from top to bottom

 

Heat flow from bottom to top

 

Heat from the horizontal line

Such radiation is the primary way most basic and, conduction and convection are secondary and occurs when the phenomenon of thermal radiation on materials. When the material absorbs the energy of radiation, it gets heated up, the temperature gradually increased, leading to a shift in the molecular structure (such as heat absorption phenomena in solids) or chaotic motion (mainly in convection between liquids and gases).

Index radiation

Emissivity E (Emittance / emissivity) means the quantity characterizing heat absorption and heat (in the form of radiation) of a surface. All materials are emissivity of about 0 to 1 (0% to 100%). The lower emission index, surface thermal radiation that it emits admission and lower.

Reflectivity R (Reflectance / Reflectivity): characterize resistance to the penetration of the radiation. This is the ratio of the energy reflected back after touching a surface. Albedo and emissivity is the complement of each other and have a total of one. That is a surface with lower emissivity, has a higher reflectivity.

Aluminum film has very low emissivity index (3%), and they apply that adjective of aluminum foil to make the reflective insulation. Reflectivity aluminum membrane is 97%.

Try the following experiment: Hold a thin aluminum foil close to our face, do not touch the aluminum plate. Soon we will feel the warmth from the surface of the aluminum plate. This phenomenon is explained as follows: face us

emits radiant heat rays, so the aluminum film has very low emissivity and high reflectivity to almost all of the heat radiation emitted from the surface we are reflected back. The result is that you feel the warmth is reflected back.

Insulating Materials Fortune

Based on the scientific principles of heat flow simultaneously with excellent properties of aluminum foil, Import Export & Investment Companies Fortune e • marketed product line capable insulation prevents heat radiation.

Components of the product:

 

 

Airbag in the middle class with the aim of preventing the thermal conductivity (although very little) between two layers of aluminum foil.

This material is applied in the field of industrial heat-resistant roof and civil, against heat for wall, ceiling and floor in the summer and reduce heat loss in winter and reduce moist monsoon phenomenon ...

In addition the company also Lisianthus product lines using aluminum plating service that works with high humidity levels of corrosive metals.

Especially this material is very effective when used for walls of high-rise buildings. Instead of building walls 20cm thick, we can build walls 10 cm then broken insulating tiles Fortune before warrant will still ensure that the sound insulation to reduce the load for the house and space saving construction up.

Wall

 

 

Bare

 

Floors

 

 

Materials Sand insulating wall:

- Brought to investors big profits thanks to cost-saving construction. This product is cheaper than all the insulating materials traditionally present in the market for a long time as foam, foam, PU foam, glass wool.

- Is designed lightweight, easy to transport, easy construction will save a tremendous amount of time helping construction works completed on or ahead of schedule.

- In terms of the environment, using the wall of sand will reduce electricity consumption for cooling and limit CO2 emissions due to the type of air conditioners, dehumidifiers discharged into the environment, one of the reasons causing the greenhouse effect. Modern production line does not pollute the environment while traditional materials to use a large amount of clay brick is a fossil raw materials can not be recycled.