Services
Products
Videos



Designing efficient lighting systems

  03/10/2015

Designing efficient lighting systems

The lighting system accounts for about 15-20% of the energy consumption in a building. Therefore, if the power saving for the system means saving a significant amount of electricity consumed in the home, offices ... Please introduce to you part installed capacity calculations for certain types of non- Typical spaces such as schools, offices, hospitals ...

Calculation and selection of installed capacity
The density of the installed capacity of the lighting system will depend on the nature of use of each space. Simultaneously, the installation must ensure requirements on the illuminance and luminance for workspaces that comply with the latest standards it is currently building codes in 2005 by the Ministry of Construction issued.


With space size as follows:
- Length: 10m
- Width: 5m
- Height: 3m
- Surface work: 0,75m


* Using fluorescent lamps with a capacity of 2 × 36W, reflective reflector, mounting audio, electronic ballast:

The average brightness requirements (lux) 150-200 250 300 350 450
The average value (W / m2) 12:16 9:12 4:56 6:08 15.2
The amount of light (the) 3 4 8 8 10
General lighting power (W) 228 304 456 608 760

* Using fluorescent lamps with a capacity of 1 × 36W, reflectors reflective, very negative, Electronic Ballast:

The average brightness requirements (lux) 150 200 250 300
The average value (W / m2) 5.92 8.88 11.1 4:44
The amount of light (the) 6 8 12 15
General lighting power (W) 222 296 444 555

Arrangement of lights and control mode
- Every room should have a separate switch
- In the space to shine in groups and group should have its own switch.
- Lighting work in time.
- Control mode can meet the different lighting needs: At work, normal and night.
- Use motion sensors to detect and respond to light in time.
- Use a timer to control the lighting system from time to time use
- Use of photovoltaic cells to control the brightness of the lighting system under natural lighting conditions, through which power control lighting accordingly.